神戸大学附属図書館デジタルアーカイブ
入力補助
English
カテゴリ
学内刊行物
ランキング
アクセスランキング
ダウンロードランキング
https://doi.org/10.24546/81011410
このアイテムのアクセス数:
21
件
(
2024-04-27
09:52 集計
)
閲覧可能ファイル
ファイル
フォーマット
サイズ
閲覧回数
説明
81011410 (fulltext)
pdf
11.6 MB
10
メタデータ
ファイル出力
メタデータID
81011410
アクセス権
open access
出版タイプ
Version of Record
タイトル
9種類のアスファルト混合物の耐流動性および剥離抵抗性などの比較評価
その他のタイトル
Comparative evaluation of plastic flow resistance and stripping resistance of 9 different types of asphalt mixtures
著者
吉田, 信之 ; 上原, 孝義 ; 飛ヶ谷, 明人 ; 久利, 良夫 ; 鎌田, 修
著者名
吉田, 信之
著者名
上原, 孝義
著者名
飛ヶ谷, 明人
著者名
久利, 良夫
著者名
鎌田, 修
収録物名
神戸大学都市安全研究センター研究報告
巻(号)
17
ページ
69-74
出版者
神戸大学都市安全研究センター
刊行日
2013-03
公開日
2019-05-30
抄録
アスフアルト混合物の耐久性に関わる諸特性の評価は,例えば耐流動性についてはホイールトラッキング試験から得られる動的安定度の大小で行うことが一般的であり実績も豊富である。しかしながら,比較的大きな動的安定度を呈するようなアスファルト混合物に対してその優劣を評価することは容易ではない。また,剥離抵抗性については,水浸ホイールトラッキング試験や水浸マーシャル安定度試験といった別の試験を行って評価している。本研究では,中実円柱供試体の繰返しねじりせん断試験に基づいた耐久性評価指標を用いて,9種類のアスファルト混合物の耐流動性,剥離抵抗性等の諸特性の評価を試みた。
In this paper, some durability-related properties of 9 different types of asphalt mixtures were evaluated by performing repeated torsional shear tests on their cylindrical specimens. Asphalt mixtures tested are dense-graded and stone mastic asphalt mixtures with three different binders, straight asphalt, Type-II polymer-modified asphalt and Type-III polymer-modified asphalt. Moreover, porous asphalt mixtures with three different binders, Type-H polymer-modified asphalt, Type-H polymer-modified asphalts for high durability and for steel plate deck pavement, were also tested. Based on the test results, plastic flow resistance, tenacity from stripping initiation up to rapture, the number of load applications at the inflection point for stripping, etc. were evaluated in a comparative manner. The main findings are followings: - Regarding the plastic flow resistance, for the both dense-graded and stone mastic asphalt mixtures, the Type-III polymer-modified asphalt possesses the highest resistance and the straight asphalt the lowest. For the porous asphalt mixtures, the Type-H polymer-modified asphalt for steel plate deck pavement exhibits the highest resistance and the Type-H polymer-modified asphalt for high durability the lowest. - Regarding the tenacity from stripping initiation up to rupture, for the dense-graded asphalt mixtures, the Type-III polymer-modified asphalt possesses the highest tenacity and the straight asphalt the lowest but for the stone mastic asphalt mixtures, the Type-II polymer-modified asphalt gives the highest tenacity and the straight asphalt the lowest. For the porous asphalt mixtures, the Type-H polymer-modified asphalt for steel plate deck pavement gives the highest tenacity and the Type-H polymer-modified asphalt for high durability the lowest. - Regarding the number of load applications at the inflection point for stripping, for the dense-graded asphalt mixtures, the Type-III polymer-modified asphalt sustains the largest number and the straight asphalt the smallest but for the stone mastic asphalt mixtures, the Type-II polymer-modified asphalt sustains the largest number and the straight asphalt the smallest. For the porous asphalt mixtures, the Type-H polymer-modified asphalt for steel plate deck pavement sustains the largest number and the Type-H polymer-modified asphalt the smallest.
キーワード
アスファルト混合物
バインダー
耐流動性
剥離抵抗
ねじりせん断
カテゴリ
神戸大学都市安全研究センター研究報告
>
17号(2013-03)
紀要論文
詳細を表示
資源タイプ
departmental bulletin paper
言語
Japanese (日本語)
ISSN
1342-9167
OPACで所蔵を検索
CiNiiで学外所蔵を検索
NCID
AA11142997
OPACで所蔵を検索
CiNiiで表示
関連情報
URI
http://www.rcuss.kobe-u.ac.jp/publication/publication.html
ホームへ戻る